Automotive eSIM management explained

29 September 2026

•

#SGP.32#OEM connectivity#eSIM management#automotive eSIM

Automotive eSIM management is how a carmaker controls the mobile connection inside every vehicle it builds. The SIM is soldered into the car at the factory. The network profiles stored on it can be changed remotely, over the air, for as long as the car stays on the road.

Regulation made that connection compulsory. Since 31 March 2018, every new car model type-approved in the EU has had to carry eCall, the system that dials emergency services automatically after a serious crash. eCall needs a cellular connection, and a cellular connection needs a SIM. Add remote diagnostics, navigation, streaming and software updates, and the SIM becomes one of the few parts a car relies on every day for 15 years or more.

This guide covers how automotive eSIM management works from the factory to the scrapyard, and what it changes for the carmakers who get it right.

Connected Car with eSIM

What is an automotive eSIM?

An automotive eSIM is a SIM chip built into the car’s telematics control unit (TCU), the module that handles its mobile connection. The technical name is eUICC. A traditional SIM holds one operator’s credentials for life. An eUICC can store several operator profiles and move between them remotely.

How is an eSIM different from a physical SIM?

A physical SIM ties a device to one mobile network operator (MNO). Changing operator means changing the card. That’s fine for a phone. It falls apart when you have 500,000 cars spread across 40 countries.

An embedded SIM removes the card slot entirely. The chip is fixed during manufacture and the operator profile becomes software. Change the profile and you change the network, with no workshop visit and no dealer appointment.

Why did carmakers move to embedded SIMs?

Cars are hard on electronics. A SIM behind the dashboard has to survive years of vibration, plus winter frost and summer heat behind a windscreen. A soldered chip copes with that far better than a card in a tray, and automotive-grade eSIMs are built and tested to that standard.

Lifespan is the bigger reason. People replace their phones every few years. A car can stay in service for 15 years or more, often across several owners and sometimes several countries. Over that time 3G networks get switched off, operator contracts expire, prices move and data rules tighten. An eSIM lets the carmaker keep pace with all of it from a distance.

What does eSIM management actually do?

The eSIM is the hardware. eSIM management is the platform and process that controls it across the connectivity lifecycle of the car. In practice that means loading the first profile in the factory, activating service when the car is delivered, switching operators when a contract or a border demands it, pausing connectivity while a car sits in storage and retiring the profile when the car is scrapped.

The category is growing quickly. Analysts at Global Market Insights valued the global market at $1.3bn in 2025 and expect it to reach $5.4bn by 2035.

How automotive eSIM management works in practice

From the factory floor to the first driver

Most connected cars leave the production line with a bootstrap profile. It gives the vehicle a basic connection to the carmaker’s back end between the factory and the showroom. A new car can spend months in transit or parked at a port, and paying for a full data plan during that time is wasted money.

Activation happens when the car reaches its owner. The operator profile for that market is downloaded and the car’s services go live, ideally before the driver has left the dealership. When this step fails, drivers get home to features that don’t respond, and interest in paid connected services fades before it has begun. We’ve looked at what activation friction costs carmakers in lost revenue, and it’s the problem DriverConnect3 was built to remove.

Crossing borders and permanent roaming rules

A car built in Germany might be sold new in Brazil or exported second-hand to Turkey years later. Both markets restrict permanent roaming, which means a device can’t sit indefinitely on a foreign operator’s network. Some countries go further and require vehicle data to be stored locally.

eSIM management solves this by downloading a local operator profile once the car is registered in a restricted market. The car stays compliant, and the carmaker avoids building a separate hardware variant for every region it sells into.

Switching networks without a recall

Operators in Europe and North America have been shutting down 2G and 3G to reuse the spectrum for newer technology. A car built around one fixed operator relationship is exposed to that operator’s pricing and coverage decisions for its entire life.

Remote profile switching changes that balance. If coverage is weak in a region, or a better commercial deal comes along, the carmaker can move vehicles to a different operator over the air. Nobody has to bring the car in.

The GSMA standards behind automotive eSIM

Remote SIM provisioning follows specifications written by the GSMA, the global body for the mobile industry. You can read the GSMA’s eSIM specifications and guidance for the full technical detail.

Most cars on the road today use SGP.02, the machine-to-machine standard, where the network side pushes profiles to the vehicle. SGP.22 covers consumer devices such as phones and smartwatches. SGP.32, published in 2023, is the newer standard written for IoT devices. It gives the device owner, in this case the carmaker, far more direct control over which profiles are downloaded and when. We’ve covered what SGP.32 changes for carmakers in a separate post.

Keeping connected vehicles secure

Every profile download is a possible way into the vehicle, so eSIM management sits inside the car’s wider cybersecurity case. Under UN Regulation No. 155, carmakers have needed an approved cyber security management system for every new vehicle sold in the EU since July 2024. Profiles are encrypted from end to end, and only authenticated servers can install or change them.

What eSIM management changes for carmakers

Lower connectivity costs over the life of the car

Connectivity is a running cost that lasts as long as the car does. An original equipment manufacturer (OEM) tied to one operator for 15 years has very little room to negotiate. With remote switching, operators have to compete for the business, and the carmaker can route vehicles to the best-value network in each market.

A foundation for software-defined vehicles

Software-defined vehicles (SDVs) are only as good as their connection. Over-the-air (OTA) updates and remote feature activation both need a SIM that’s active and on the right network. When eSIM management is weak, OTA campaigns stall on cars that have quietly dropped off the network, and features customers have already paid for never switch on. We’ve written about what eSIM means for automakers building software-defined vehicles in more detail.

Better data from every vehicle

A well-run eSIM estate tells you which cars are connected and how they’re being used. That visibility feeds usage analytics through Explore3, giving product teams early signals on which services drivers take up. For connected fleet operators, the same connection supports in-vehicle payment controls such as FleetWallet3, which checks fuel spend against the vehicle making the purchase.

How Cubic3 manages automotive eSIM at scale

Cubic3 manages connectivity for carmakers in more than 200 countries through over 550 mobile networks. Škoda has used Cubic3 connectivity across Europe since the launch of the Scala and Kamiq in 2019. In March 2025, Cubic3 partnered with Thales to bring advanced eSIM capability to connected vehicles, and you can read how Cubic3 and Thales are putting SGP.32 into production vehicles.

For the carmaker, that means one connectivity partner and one set of controls, with local profiles wherever regulation requires them. Activation at delivery and the freedom to change operator years later sit on the same platform. The SIM in every car becomes a route to new revenue for as long as the car is on the road. Our guide to driving the future of connected vehicles with eSIM sets out how that works across a global vehicle programme.

Find out what your connected cars could be earning

Every car that ships with an idle SIM is a service you can’t sell. See how DriverConnect3 gets connected services running from the first drive.

About Cubic3

Cubic3 provides advanced connectivity solutions for software-defined vehicles (SDVs) across 200+ countries. We help automotive, agriculture and transportation OEMs navigate the complexities of connecting vehicles while ensuring compliance with global regulations. With access to over 550 mobile networks, our smart connectivity empowers OEMs to innovate, scale and unlock new opportunities, driving efficiency and growth.