Choosing a fleet payment app without in-cab hardware

19 November 2026

•

#Last-mile delivery#Fleet Payments#FleetWallet3#delivery fleets#Fleet payment app#pay at pump#EV charging

When you compare fleet payment vendors on in-app payment for delivery drivers, check where the app is accepted, how a driver unlocks the pump, what controls apply to each driver and van, and whether each payment can be checked against vehicle data without fitting a box in the cab. FleetWallet3 lets drivers pay from the vehicle with no additional in-vehicle hardware, using the telematics and fuel cards a fleet already has.

Hardware is a bigger problem in delivery than in most fleets. Vans are leased, hired in for peak season and moved between depots, and many are driven by agency staff. Every unit that has to be fitted means a van off the road, and another box to remove when the lease ends. An app moves payment onto something the driver already carries, or onto the vehicle’s own screen.

The checklist below is vendor-neutral. Under each point is how FleetWallet3 handles it.

What changes when payment moves into an app

With a plastic fuel card, control sits with whoever is holding the card. If a card is shared between drivers or left in the wrong van, every transaction still looks the same.

App-based payment works differently. The driver arrives at the forecourt, the app confirms the location, the driver picks the pump number and approves the payment, and the pump is unlocked for that fill. Each payment is tied to a named driver and, where vehicle data is available, a named van.

Using a phone on the forecourt

Drivers are used to signs telling them not to use a phone at the pump. The Petrol Retailers Association has addressed this directly: its guidance allows a phone to be used for payment from inside the vehicle, but not while fuel is being dispensed. In practice, the driver starts the payment in the cab, puts the phone away and then fills up. Any app you shortlist should fit that routine.

Fleet payment app checklist: eight points to compare

1. Where drivers can pay

An app is only useful where the forecourt accepts it. Ask each vendor for the number of sites, the countries and the fuel brands, and check them against the stations your routes pass. A depot-based operation needs accepting stations close to its depots.

How FleetWallet3 handles it: FleetWallet3 is accepted at more than 5,300 fuel retailers in 12 European countries through Cubic3’s partnership with CarPay-Diem.

2. How the driver starts a payment

Count the steps at the pump. Most app flows ask the driver to confirm the station, choose a pump number and approve the payment before lifting the nozzle. Fewer steps means less time on the forecourt and fewer failed fills. Ask whether the payment can start from the vehicle’s own screen as well as from a phone.

How FleetWallet3 handles it: with FleetWallet3 the driver pays from the vehicle, through a mobile app

3. What the driver needs

Find out whether the app runs on drivers’ own phones or only on company devices, and what happens when there is no mobile signal on the forecourt. App-based payment usually needs a data connection to unlock the pump. If you use agency drivers, check how quickly a new driver can be set up on a Monday morning and removed at the end of a placement.

4. Spend controls per driver and per van

Controls set on a card apply to whoever holds the card. In an app, controls can follow the driver and the van: fuel type, amount per fill, time of day and location. Ask which of these can be set, and whether they are checked before the pump is unlocked or only reported afterwards.

5. Checking payments against vehicle data without a box

Removing hardware only works if something still confirms the van was at the pump. Ask where the vehicle data comes from: telematics already fitted to the fleet, or the manufacturer’s own connected-vehicle data. Then ask what is checked, such as location, tank size and fuel type.

How FleetWallet3 handles it: FleetWallet3 works with existing telematics systems and needs no additional in-vehicle hardware.

6. Set-up time

With no hardware, set-up should come down to accounts, drivers and spending rules. Ask how long it takes from signing to the first transaction, and whether any van has to come off the road.

How FleetWallet3 handles it: FleetWallet3 needs no hardware fitted to the vehicle, so vans stay in service while it is set up. Set-up takes [METRIC: approved set-up time required].

7. Reconciliation and VAT

Ask what a single transaction record contains, how often records reach your finance system or TMS, and how VAT invoices are produced. To reclaim VAT on road fuel, HMRC requires a valid VAT invoice, as set out in VAT Notice 700/64. Ask every vendor for a sample export.

How FleetWallet3 handles it: FleetWallet3 automates expense reconciliation by matching each payment to its vehicle when it is made. The full process is covered in fleet payment reconciliation for delivery fleets, step by step.

8. EV charging for mixed fleets

If you run electric vans, ask whether the same app pays for public charging. Drivers can usually pay by bank card anyway. In the UK, new public charge points of 8kW and above and all charge points of 50kW and above have had to offer contactless payment since 24 November 2024. In the EU, the Alternative Fuels Infrastructure Regulation requires card payment at new charge points of 50kW and above, with existing ones on main routes due to follow by 1 January 2027. Payments made that way sit outside the fleet’s spending controls and records.

How to test a shortlist

Ask each vendor on your shortlist to run a live fill-up at a forecourt near one of your depots, using an agency driver’s phone. Time it from arriving at the pump to driving away. Then ask for the transaction record and check three things: what it contains, whether it matched the right van, and how long it took to reach your system.

That test shows how FleetWallet3, or any other app, performs where your drivers actually fill up.

Frequently asked questions

Can drivers pay for fuel with an app without hardware fitted to the van?

Yes. App-based payment uses the driver’s phone or the vehicle’s own screen to unlock the pump, so nothing has to be installed. FleetWallet3 works without additional in-vehicle hardware and is accepted at more than 5,300 fuel retailers in 12 European countries.

Is it safe for drivers to use a phone to pay at the pump?

Petrol Retailers Association guidance allows a phone to be used for payment from inside the vehicle, but not while fuel is being dispensed.

What happens if there is no mobile signal on the forecourt?

App-based payment usually needs a data connection to unlock the pump, so ask each vendor what drivers do when the signal drops. FleetWallet3

Can a fleet payment app check payments against vehicle data without a telematics box?

It can use data from telematics the fleet already runs, or from the vehicle’s built-in connectivity where the manufacturer provides it. FleetWallet3 works with existing telematics systems and needs no additional hardware in the vehicle.

Do EV drivers need a fleet app to pay for public charging?

In the UK, new public charge points of 8kW and above and all charge points of 50kW and above have had to accept contactless payment since 24 November 2024, so drivers can pay by card. FleetWallet3.

See it from the driver’s seat

Find out how FleetWallet3 unlocks the pump without a box in the cab

About Cubic3

Cubic3 is a connected vehicle platform company headquartered in Dublin and backed by SoftBank. FleetWallet3 is a connected fleet payments platform for delivery and logistics fleets. [BOILERPLATE: replace with the approved version and keep the FleetWallet3 line.]

About Cubic3

Cubic3 provides advanced connectivity solutions for software-defined vehicles (SDVs) across 200+ countries. We help automotive, agriculture and transportation OEMs navigate the complexities of connecting vehicles while ensuring compliance with global regulations. With access to over 550 mobile networks, our smart connectivity empowers OEMs to innovate, scale and unlock new opportunities, driving efficiency and growth.